Pneumatic Steel
Strapping Tools with a Seal Joint
FROMM Model A-451
Pneumatic tensioner, particularly
suitable for the steel and steel related industry. The tool is well
balanced and allows a maximum strap tension of 7,500 N. For the seal,
overlap pusher type seals are used. For sealing the pneumatic double
notch sealer Model A-461 is recommended. Weight: 4.3 kg (9.5 lbs.).
FROMM Model A-461
Pneumatic single hand sealer for a
perfect double notch upcut joint. The double notch seal guarantees a
minimum breaking strength of 75%. The seal-safe mechanism avoids
faulty seal joints by incorrect operation of the sealer. Suitable for
regular duty and high tensile strapping. Weight: 4.2 kg (9.3 lbs.).
FROMM Model A-480
Pneumatically powered tensioning and
sealing tool for a single notch seal joint using overlap pusher type
seals. May be used for all regular duty and high tensile straps. Ideal
tool for strapping of tubes, wire coils, rods, and bundles of all
kinds as well as for curved or irregularly shaped packages. Available
in two different tension versions. The tool may but does not have to
be suspended. Weight: 4.2 kg (9.3 lbs.).
FROMM Model A-482
The only tool of its kind that does not
require any suspension thanks to its limited weight of 6.5 kg (14.3
lbs.) only. It permits the use of regular duty and high tensile strap
with a maximum thickness of 0.90 mm (0.035"). The double notch upcut
seal joint guarantees an adequate seal efficiency. In cases where in
spite of the low weight of the tool it is advantageous to suspend it,
special suspension brackets can be supplied. Weight: 6.5 kg (14.3
lbs.).
FROMM Model A-483
Pneumatic pusher type strapping tool
for regular duty and high tensile steel strapping in widths of 25 mm
(1") and 32 mm (1 1/4"). The double notch upcut joint using overlap
seals provides a breaking strength of 75%. The tool has been designed
in such a way that it allows a very efficient operation. The
feed-wheel is lifted pneumatically and as a result the strapping can
be inserted into the tool without any problems. It is preferable to
suspend the tool. Weight: 19.0 kg (41.8 lbs.).
|